东芝 MG11 16TB 企业级 SATA 硬盘 商品图片

    Toshiba · MG11ACA16TE

    东芝 MG11 16TB 企业级 SATA 硬盘

    16TB 容量、3.5 英寸规格及 SATA 6Gb/s 接口,面向经过兼容性核验的服务器、存储阵列和企业数据归档。具体型号为 MG11ACA16TE,请按该料号核对扇区格式及平台支持。

    • 16TB / 3.5英寸 / SATA 6Gb/s
    • CMR 传统磁记录,7200rpm
    • 1 GiB 缓存,保留厂家原始单位
    • 281 MiB/s 最大持续传输典型值
    • 默认512e;可转换4Kn
    • 最高550TB/年

    以下为本型号已发布的产品资料,选配范围不等于当前交付配置。

    配置与价格

    配置与价格待确认,请联系顾问获取具体型号的报价。

    此处列出当前配置标价;活动价、税费口径、库存、兼容性、交期与服务范围请咨询,并以具体报价及合同约定为准。

    详细参数与选型说明

    基础规格与接口 / Capacity, Format and Interface

    容量 Capacity16 TB (1 TB = 10^12 bytes)(十进制标称容量,格式化后可用容量减少)
    接口 InterfaceSATA 6 Gb/s; single port(SATA 单端口接口)
    规格 Form factor3.5 inch(3.5英寸规格)
    记录方式 RecordingCMR(传统磁记录)
    扇区格式 Sector formatDefault 512e: 512 B logical / 4096 B physical; convertible to 4Kn(默认512e,支持资料所列4Kn格式转换)
    接口版本 Interface revisionSATA 3.5a

    性能与缓存 / Performance and Cache

    转速 Spindle speed7200 rpm(每分钟转速)
    缓存 Cache1 GiB (1,073,741,824 bytes per GiB)(缓存按二进制GiB计量)
    最大持续传输 Max sustained transfer281 MiB/s, maximum sustained typical(最大持续传输率的典型值)

    企业特性与负载 / Enterprise Features and Workload

    年工作负载 Workload550 TB/year (read/write/verify host commands)(包含主机读、写和校验命令的年度工作量)
    统计平均故障间隔 MTBF/MTTF2500000 h; AFR 0.35%(群体统计指标,不等于单盘寿命或无故障承诺)
    辅助记录 Assisted recordingCMR with FC-MAMR(CMR结合磁通控制微波辅助磁记录)
    设计运行 Availability24 hours/day, 7 days/week(面向全天候连续运行)
    安全版本 SecurityStandard; not SIE (Y suffix), not SED (P variant)(标准版;SIE和SED属于其他订货型号)
    写入保护 Write protectionPersistent Write Cache (512e models)(512e型号的持久写缓存技术)

    物理、电源与环境 / Physical, Power and Environment

    读写功耗 Operational power7.41 W typical, 4KB Q1 write/read(4KB Q1读写典型功耗)
    空闲功耗 Idle power3.66 W typical, Active Idle / Idle_A(典型空闲功耗)
    密封 EnclosureHelium sealed(氦气密封)
    尺寸 Dimensions147 × 101.85 × 26.1 mm (L×W×H, max)(长×宽×高,最大外形尺寸)
    重量 Weight730 g max(最大重量)

    选型、兼容性与使用限制 / Selection, Compatibility and Limits

    平台兼容性 Host compatibility核对服务器/工作站、RAID/HBA、背板、固件、容量与扇区格式;参数不等于整机兼容认证。 / Validate host, RAID/HBA, backplane, firmware, capacity and sector format; specifications are not system qualification.
    扇区格式 Sector format默认512e;转换4Kn前核实平台支持并完整备份,格式转换可能删除数据。 / Default 512e; confirm support and back up before 4Kn conversion, which may erase data.
    供电与安装 Power and installation核对3.5英寸盘位、托架、SATA接口、电源启动余量和风道;热插拔能力由主机系统决定。 / Check 3.5-inch bay, carrier, SATA connection, PSU spin-up headroom and cooling. Hot-swap depends on the host system.
    可用容量与备份 Usable capacity and backup标称TB为十进制容量,格式化和文件系统会减少可用容量;RAID不能替代独立备份。 / TB is decimal capacity; formatting and filesystems reduce usable space. RAID is not a substitute for independent backup.
    统计可靠性 Statistical reliabilityMTBF/MTTF和AFR是厂家规定条件下的群体统计指标,不是单盘寿命或零故障承诺。 / MTBF/MTTF and AFR are population statistics under vendor conditions, not individual drive-life or zero-failure guarantees.
    单位与安全版本 Units and security variantsMiB/GiB按二进制计量;本页为Standard料号,SIE/SED是其他订货型号选项。 / MiB/GiB are binary units. This is the Standard SKU; SIE/SED options use different ordering codes.

    官方资料与咨询 / Official Documentation and Support

    官方彩页 Datasheethttps://storage.toshiba.com/docs/enterprise-hdd-documents/MG11-Product-Manual.pdf
    官方产品页 Official product pagehttps://storage.toshiba.com/enterprise-hdd/cloud-scale-capacity/mg11-series
    官方资料 Official document — Toshiba MG Series EMEA datasheethttps://www.toshiba-storage.com/wp/wp-content/uploads/2018/04/TOSHIBA-Datasheet-14-07-2026-MGSeries-accessible-EN-1.pdf
    官方资料 Official document — MG11 product manual Rev 00https://storage.toshiba.com/docs/enterprise-hdd-documents/MG11-Product-Manual.pdf
    资料核验日期 Source checked2026-09-17
    产品图片说明 Image disclosure东芝 MG 企业系列品牌示意,无容量标签;非本料号实拍,不代表具体外壳。 / Toshiba MG enterprise-family brand illustration without a capacity label; not this exact part or chassis.
    咨询范围 Enquiry scope可协助核对选型及参数;价格、库存、交期、保修及交付范围以实际确认结果为准。 / Ask for selection and specification checks; price, stock, lead time, warranty and delivery scope require confirmation.

    商品图片

    图片可能包含外观参考或参数说明;具体配件、接口与交付配置以报价清单为准。

    咨询 MG11ACA16TE

    请提供所需数量、应用场景和配件需求,核对配置与报价。